Kuiper · Solar array drawing

Kuiper · Solar array drawingModule placement, independent strings and a generic site overview.

Module & table

Module geometry

Modules / series stringIndependent strings

Orientation Physical arrangement

Placement changes keep electrical order. Opposed faces use five-high patches, tilt magnitude and a 0.15 m horizontal face gap; patch spacing is 1 m. Edit faceGapM / patchGapM in the recipe. Individual XYZ placements override a preset. No collision or structural check is implied.

Module width · mModule length · m

Across gap · mUp-slope gap · m

Tilt · degreesAzimuth rotation · degrees

Low-edge height · m

8° is an editable demonstration assumption. Azimuth rotates the table around world +Z; 0° means the module-row axis is +X.

Electrical path

Wiring order

Positive lead · mNegative lead · m

Clip offset · mExtra slack / link · m

Box outlets at 35% / 65% width and mid-length, lead polarity/lengths, height, tilt and clip routing are editable assumptions. Selecting a module imports its outline dimensions only.

Programmable recipe · order / placement / routes

Edit each string's own order with “custom”, or set XYZ interior waypoints by link key, e.g. “S01-M01+>S01-M02-”. Move any module independently with modulePlacements: {"S01-M01":{"originXYZ":[4,3,2],"tilt":8,"azimuth":45,"rotation":90}}. Angles are degrees; rotation acts in the module plane. Endpoints stay attached to boxes. Physical moves never change string membership. Cross-string connections are refused.

Geometry & assumptions

Generic module illustration

Generic dimensions loading…

Generic drawing tool. No electrical rating, structural approval, or connector compatibility verdict. Mated engagement depth is unverified. XYZ polylines are proposed routes; no physical obstacles are modeled.

Wheel to zoom · drag to pan · select a module or link · trace indicates route order, not current

Lead pair reaches proposed routeExtension required · proposed pathTrace previews the selected wiring order; it is not electrical current.

—modules · independent row strings

—series links · no inter-string bridge

—3D intermodule route · excludes slack

—links require extension

Selected connection

All views use Kuiper's native renderer. Developed wiring uses the left-to-right electrical convention and schematic curves; rear mirroring applies to physical plan and 3D. Plan and 3D show the proposed XYZ routes. Only XYZ routes supply physical lengths. Each row is an independent series string. Lengths never come from screen pixels. Red is the positive lead, pale blue the negative lead. Open gaps require extensions; they are not connected cable.

Generic connector detail

Generic symbols only. Cable endpoints are illustrated; physical connector dimensions and compatibility require entered equipment data.